Neck: 4/32" top of pickup to bottom of stringĪction: set to 8/64" at 4th string (low string) at the 12th fretĦ/64" at 1st string (high string) at the 12th fret Neck: 4/64" top of pickup to bottom of stringĪction: set to 5/64" at 6th string (low string) not to exceed 6/64"Ĥ/64" at 1st string (high string) not to exceed 5/64"īridge: 2/32" top of pickup to bottom of string Pickup height: measure space from the top of the pickup to the bottom of the low and high E strings using the 6" steel rule in 1/64" increments.Īction: set to 2/32" at the 12th fret for all stringsīridge: 3/64" top of pickup to bottom of string Nut height: Measure space between top of first fret and bottom of each string with feeler gauge. Measure space between the top of the 7th fret and bottom of string with feeler gauge. Truss rod: Capo 1st fret and fret low E string at 15th fret. The inner strings will graduate in height and follow the fingerboard radius. All strings must be tuned to pitch when measurements are made.Īction: Measured from top of 12th fret to bottom of string with 6" steel rule in 1/64" incrementsįor Bass and Baritone there are measurements for the low and high strings. Do you have any specs or measurements to assist in doing this?Īll measurements with guitar in playing position, no exceptions, guitar cannot be laid flat on a table or workbench to make measurements. Q: I want to properly set up my Danelectro Guitar, Bass, and Baritone.
0 Comments
Leave a Reply. |